Batch 10_detail_edge measured 532 new below-sea pixels on seed
1158286446 and 44 on 72563200 -- exported terrain under the sea scalar
that the water grid (classify-driven, and correctly identical) calls dry.
Located: every one of them strictly inside the crater's physical carve
radius, 201-323 px out of 640.
Mechanism, confirmed against the data: detail moves a column's PRE-carve
height, and the carve is Lerp(curvedH, target, t). At t ~ 0.45-0.62 a
pre-carve drop of up to 8.4 m (relief plus the band-shift the warp
implies) still passes 0.02-3.53 m through, which is enough to push a
column sitting 0-3.45 m above the sea inside the bowl under it.
The crater carve is supposed to be the FINAL authority on its own
terrain, so detail now yields to it: CraterDetailWeight is 0 inside
0.80 x CraterRadius (exactly the carve's own radius) and feathers to
full by 1.05 x, scaling both the edge shift and the relief skin. Inside
the carve, B is bit-identical to A by construction, so the count is zero
rather than small. The reverted incision pass carried the same exclusion
for the same reason -- the principle outlived the pass that motivated it.
Re-running the 6 B_detail generations; A_off and the continuity run are
untouched by a detail-only change.
Co-Authored-By: Claude Opus 5 (1M context) <noreply@anthropic.com>
PASS B, replacing the reverted incision. The developer's sketch asked for
the shelf/riser BOUNDARY to be organic, not for water: notches, coves and
small peninsulas where a flat shelf meets its riser, instead of the clean
oval contour the curve produces.
Mechanism (the task's preferred "boundary warp", in its most
monotonic-safe form): every shelf/riser boundary is the contour where the
raw height crosses K3, K4 or K5, so the boundary is warped by SLIDING
THOSE THREE KNOTS per column -- edgeShift = simplex(resolvedSeed + 7507,
12 per island width) x ShelfEdgeVariation. The contours then wander in and
out of the terrain instead of tracing an iso-height line. Noise-warped by
construction, so there is no grid direction for an artifact to line up on
-- the failure mode of the thing this replaces.
Why slide knots rather than perturb a weight or the input height:
monotonicity becomes structural instead of conditional. The curve is
strictly monotonic for ANY ordered knot set, so no derivative bound, no
amplitude-vs-feather-width tuning, no way for a dial to invert a column.
MaxEdgeShift keeps the set ordered (half the smallest margin to a fixed
knot = 12.3 m of input height for the v5 knots); the config dial is
clamped to it, loudly. AssertMonotonic now sweeps 24 corners -- the 8
modulation extremes x {-max, 0, +max} shift -- and checks the bound first.
K1, K2 and K6 never move, which buys the guarantees exactly rather than
statistically: below K2 and above K6 a warped column is bit-identical to
an unwarped one, so the red ceiling still floors every shelf edge (storm
ladder safe), the 420 m cap still caps, and the toe and summit spikes are
untouched. The block slides rigidly, so the bench and mid-riser keep their
exact widths -- shelf interiors stay flat, riser interiors keep their
profile, and only the foothill riser and plateau stretch to absorb it.
The micro-relief mask takes the same shift, so pass A's skin follows the
shelf wherever pass B moved its edge.
Dial ShelfEdgeVariation (default 5 m of INPUT height -- a boundary
displacement, not an elevation change) under the existing TerrainDetail
gate; both passes stay one judged unit. TDTL v2 body records relief and
edge amp/frequency/seed-offset plus the applied clamp bound; writer,
parser and harness follow. No blueprint was written between the revert
and this commit, so v2 only ever means relief + edge warp on disk.
Co-Authored-By: Claude Opus 5 (1M context) <noreply@anthropic.com>
The task-10 draft's PASS B shipped and produced the canonical grid
artifact: thousands of straight, disconnected, pooling scratches. Per-
cell steepest descent on a regular grid can only route along its eight
neighbour headings, so at map scale the "channels" read as hatching,
not drainage. Reverted entirely rather than tuned -- no K, p or mask
setting fixes a directional basis. Rivers and erosion move to Phase C
as a hydraulic-erosion pass over FINAL terrain.
Removed: FlowAccumulation / IncisionWeight / EdgeBlend and the INC_*,
SEA_CLAMP, SHELF_INC_WEIGHT and CRATER_* constants; RunIncisionPass and
the pass-2b call; the six incision fields from TDTL (writer, parser,
harness). KEPT, untouched and developer-approved: pass A, the shelf
micro-relief skin, and its ShelfReliefAmp dial.
The crater carve folds back into the single pass-2 loop it came from,
carving two LOCALS written once each. That is what the code did before
the draft split it out, and it makes the aliased double-carve that the
split introduced (fix 1b98fb5) structurally impossible rather than
merely fixed -- there is no longer a read-modify-write to get wrong.
TDTL bodies are now versioned (BlueprintFormat.TDTL_VERSION = 2) and the
parser skips a body version it does not know instead of misreading the
longer v1 layout into plausible nonsense. The only v1 payloads that
exist are in the reverted batch's own tree.
Co-Authored-By: Claude Opus 5 (1M context) <noreply@anthropic.com>
The pass-2c restructure carved sequentially through both map
references; with TerrainCurve off the classify map aliases the height
map, so the second Lerp re-carved already-carved cells — a deeper
bowl and shifted crater-adjacent water/biomes on curve-off runs only.
Caught by the task-10 continuity oracle (md5 vs the batch-08
curve-off baseline); curve-on runs were unaffected (separate arrays,
oracle 24/24). Both values are now read before either write.
Co-Authored-By: Claude Fable 5 <noreply@anthropic.com>
Two paired detail passes on the locked v5 skeleton, output-heights
only (classify path untouched):
PASS A — shelf micro-relief: +-ShelfReliefAmp (default 3 m) Simplex
skin (seed resolved+7409, ~40 undulations/island ~ 200 m features),
weighted by shelf-ness (full mid-shelf, feathered to zero 30% of a
band half-width into the risers) — both shelves get their rolling
texture back; risers and peaks untouched.
PASS B — drainage incision: D8 steepest-descent routing + height-
ordered flow accumulation over the curved+relieved land
(TerrainDetailPass — pure array machinery, named C++ candidate per
D-035); depth = K*accum^p*slope (K=0.78, p=0.45 concave, cap 30 m),
masked full on risers / 30% on shelves / zero on the toe, above the
plateau top, and within 1.2x CraterRadius (feathered to 1.4x); hard
clamp: carved height >= sea + 1 m. Ordering: curve -> relief ->
incision -> crater carve (the carve stays the final authority; carve
moved to its own pass 2c, bit-identical expression on both maps).
The pass prints its own MEASURED depth distribution.
Gate TerrainDetail "off"|"v1" (default v1; both passes one judged
unit; no-op without the curve) + ShelfReliefAmp dial. New TDTL section
(38 B: version + relief/incision params + seed offset) across
writer/parser/harness — blueprints stay self-describing.
Co-Authored-By: Claude Fable 5 <noreply@anthropic.com>
The documented one-liner the task-09 gate triggers: TerrainCurve gate
is now "off"|"v5" (default v5 = the BALANCED preset, id 2);
"v5-compact" retired with a verdict-specific error, "v5-balanced"
redirects to plain "v5". Knots/TCRV encoding unchanged.
Co-Authored-By: Claude Fable 5 <noreply@anthropic.com>
The three corner fixes (both presets): riser endpoint slope floors
0.2 -> 0.1 (0.1u + 0.9*smoothstep — climbs decelerate into shelves and
accelerate out); summit-spike base floor 0.1 -> 0.05
(0.05u + 0.95*u^4 — no hard skirt under the peaks); SHELF_SPAN_MIN
2 m -> 6 m (pronounced shelves keep a gentle tilt).
Knots are preset-parameterized (CurveKnots, explicit parameter — pure,
D-035), calibrated from the same pooled batch-04 CDF:
COMPACT P65/77/84/88/94/97 -> 65/12/7/4/6/3/3 land split
BALANCED P60/73/83/88/96/99 -> 60/13/10/5/8/3/1
Gate: "off"|"v5-compact"|"v5-balanced" (batch-only tri-state;
interim default v5-balanced pending the developer's verdict — the
winner becomes plain "v5" in a follow-up commit); v1-v4 retired
loudly. Assertion runs per preset (8 corners x per-seed spikeMax; the
lowered floors stay strictly positive). TCRV v5 extension (+9 B):
preset id + K5/K6 — the effective curve is unambiguous from the
record; old records parse (version-dispatched); harness compares.
Co-Authored-By: Claude Fable 5 <noreply@anthropic.com>
Per the task-07 gate: the terraces work but uniform anchors put a flat
ring at exactly 100 m and 220 m on every mountain. v4 keeps v3's
structure (frozen toe/rise, three risers, per-seed u4 spike to 420 m)
and turns the shelf anchors into smooth spatial fields: bench
100+-12 m and plateau 220+-20 m via two decorrelated very-low-freq
Simplex fields (~3 undulations per island width), plus a strength
field (~5/island) blending each shelf's output span between ~2 m
(pronounced flat) and ~25 m (barely a hint) — the optional strength
modulation shipped, ordering-safe by construction (worst-case bench
top 0.6962 < plateau min 0.9468). Field seeds derive from the RESOLVED
noise seed + fixed offsets (7101/7207/7303) — no config knob. Apply is
per-column with all modulated values as pure parameters (D-035); the
classify path never sees them.
Monotonicity assertion now sweeps all 8 modulation-extreme corners x
per-seed spikeMax. TerrainCurve gate "off"|"v4" (default v4);
v1-v3 retired loudly. TCRV extended (+36 B when version>=4:
amplitudes, span range, frequencies, seed offsets — length-framed
section makes the layout change safe; parser dispatches on the curve
version byte; harness compares the extension).
Note: MapGenerator.cs also carries the developer's editor whitespace
normalization (spaces->tabs, git diff -w empty before this change).
Co-Authored-By: Claude Fable 5 <noreply@anthropic.com>
Per the task-06 ground-test verdict (floor and 420 m ceiling frozen;
v2's ascent read flat-then-wall — 87% of the vertical budget in the
last 4% of input): the ascent is rebuilt as a terraced climb. Knots
recalibrated from the same pooled batch-04 land CDF at
P59/72/82/87/95/98 (K=0.509179/0.604081/0.698485/0.767213/0.930304/
1.050720), pooled land fractions exactly 59/13/10/5/8/3/2 (orange/red/
foothill-riser/bench/mid-riser/plateau/spike). Segments: frozen toe
and rise (storm anchors), smoothstep foothill riser to a near-flat
100 m bench, smoothstep mid riser to the near-flat white plateau at
220 m (relocated from 50 m — mountain towns/snow belong there),
per-seed-normalized u4 summit spike to 420 m (both retained from v2),
linear tail. Per-seed effective-curve monotonicity assertion retained.
TerrainCurve gate: "off"|"v3" (default v3); v1/v2 retired with a
loud config error (old blueprints regenerable). TCRV: knot slots carry
K1..K4 (K5/K6 are version constants), PlateauLo/Hi carry the two bench
anchors; version byte selects the semantics.
Co-Authored-By: Claude Fable 5 <noreply@anthropic.com>
Per the task-05 hillshade-gate verdict: lowlands frozen (identity/toe/
rise/shoulder/plateau byte-unchanged); the spike now maps [t4,
hMaxSeed] — each seed's own raw pre-curve maximum, computed in a new
pass-1 over GenerateTopography — onto the peak band, so every island
reaches the ceiling (v1's pooled-max domain left mid-range seeds at
110–175 m). Spike stiffened to 0.1u + 0.9u^4; peak cap raised to
420 m above sea (1.82869). Degenerate near-flat guard: spike domain
floored at t4 + 0.01. The curve is now SEED-DEPENDENT: hMaxSeed is a
pure parameter (D-035), recorded in TCRV (field renamed
HMaxCal -> SpikeMax, same byte layout; v1 semantics = pooled max, v2 =
per-seed), and the monotonicity assertion runs per generation against
the effective curve. TerrainCurve gate: "off"|"v2" (default v2);
"v1" retired with a loud config error (task-05 blueprints are
regenerable). Classify path untouched — the biome/water oracle must
hold unchanged.
Co-Authored-By: Claude Fable 5 <noreply@anthropic.com>
0_height: hypsometric storm-ladder tint x Lambert NW hillshade over
the curved heights, captured after topography in both curve modes —
relief is finally visible. Renumbers nothing.
TCRV (50 B, emitted when the curve is on): curve version + input knots
+ output bands, so blueprints are self-describing about the map their
heights went through (H7 spirit). Parsed into
WorldBlueprint.TerrainCurve (null = raw legacy profile); server treats
it as metadata. Round-trip harness compares it when present.
Co-Authored-By: Claude Fable 5 <noreply@anthropic.com>
HeightCurve (pure static, D-035): calibrated monotonic piecewise map —
identity at/below sea 0.15; ease-out toe to the orange ceiling 0.206
(75% coverage, knot t1=P75=0.628736 from batch-04's pooled flat-sea
land CDF, 340.6M samples); linear rise to red 0.27 (t2=P90); smooth
shoulder to the 50m plateau shelf 0.3492 (t3=P93); near-flat plateau
step (t4=P96); accelerating spike to the 220m peak cap 1.0265; linear
tail past the calibrated max. Strict monotonicity asserted numerically
at startup, loud throw on violation.
Applied in GenerateTopography AFTER noise+falloff+Trench, BEFORE the
crater carve (carve cuts curved terrain; rim/bowl untouched by the
curve). Biome oracle mechanism: a retained uncurved classify heightmap
(alias of _heightMap when off, zero cost) feeds biome rules, both
flood fills, and the shared water predicates — classification is
curve-invariant by construction. Towns/roads/diagnostics/exported
heights use curved terrain; town positions may legitimately move.
Config gate TerrainCurve: "off"|"v1" (default v1), unknown values
rejected loudly.
Co-Authored-By: Claude Fable 5 <noreply@anthropic.com>
PlaceTownNodes read _heightMap[rx ± slopeRadius] unclamped; candidates
spawn at [20, MapSize-20] but slopeRadius is 40 at 8K, so border
candidates indexed out of bounds. Never fired only because border land
stayed underwater and failed the above-sea test first — the
redistribution curve's flat coastal toe arms exactly that path
(D-033 consequence (b), recorded in sweep 01 and task 04).
Behavior-preserving except where it would have crashed.
Co-Authored-By: Claude Fable 5 <noreply@anthropic.com>
SeaLevelModel: "flat" (one scalar, SeaLevelValue) or "field" (the
legacy latitude Lerp 0.26..0.15). Only GetSeaLevel's body changes —
all nine call sites (crater carve target, both flood fills, biome
split, beach band, Capitol window, town filters, A* zero-point)
inherit the model automatically; no consumer re-tuning. Default:
flat 0.15, pinned in ServerConfig.json.
Co-Authored-By: Claude Fable 5 <noreply@anthropic.com>
Three new v2 tagged sections carrying the water-bodies stage output:
WBID (MapSize^2 u16 body ids; 0 none, 1 ocean, 2..N lakes), WBTB
(count-prefixed 20-byte records: id, type, provisional salinity,
transitional flat surface level, pixel count, centroid), WSRF
(MapSize^2 u16 quantized levels; 0 = no-water sentinel, 1 + L*32768
encoding, ~7.7 mm world resolution). Written only when the blueprint
carries water; absent on legacy re-encodes. Parser registers all
three (length + type checks) into new WorldBlueprint members —
consumed by nothing at runtime. Round-trip harness now compares the
water sections whenever the source carries them; v1-source baseline
stays green.
Co-Authored-By: Claude Fable 5 <noreply@anthropic.com>
IsWaterPixel/IsOceanPixel/IsLakePixel are the single per-pixel water
truth; AssignBiomesAndDraw's water branch now calls them (verbatim
rules — behavior-preserving, proven by the bit-identical-biomes oracle
at acceptance). New IdentifyWaterBodies stage between the masks and
biomes: ocean = body 1, lakes labeled 2..N with CalculateTrueOcean's
4-connectivity in deterministic scan order; one transitional surface
level per body (GetSeaLevel at the body centroid; ocean at map
centre). 0_water snapshot painted from the stage's own outputs.
Priority-flood pit-fill (heap + pit-queue variant) runs as validated
diagnostics only — serializes nothing, asserts filled>=original and
full-map non-ascending drainage (reverse BFS, no sampling), reports
closed-basin statistics.
Co-Authored-By: Claude Fable 5 <noreply@anthropic.com>
Config flag SkipRoads (default false): when on, GenerateRoadsAsync and
the 3_roads snapshot are skipped entirely; export proceeds with all
four road sections present but empty (both v2 and legacy v1 permit
zero counts); the console states loudly that the blueprint is a
road-less iteration artifact.
Co-Authored-By: Claude Fable 5 <noreply@anthropic.com>
v2 tagged-section container (D-030): raw ISLA magic + u32 version gate,
[u32 tag][u64 length][payload] sections — params (resolved generation
inputs incl. impact centre), heights f32, biomes u8, towns with the
highway-node flag, four road tiers identified by tag not position.
- BlueprintFormat.cs: the single tag/constant registry.
- BlueprintWriter.WriteV2: blueprint-typed, callable outside a
generation run; generator and harness are both just callers.
- ExportMapData dual-writes: v2 under the primary seed name, legacy v1
beside it as _v1.dat (safety net; removal is a future task).
- MapDataParser: LoadMapDataFromPath entry point; v1 parse body
extracted intact as LoadV1 (v2 reader lands in the next commit).
- RoundTripHarness scene: load v1 -> write v2 -> load v2 -> semantic
equality, headless, seconds per cycle.
Co-Authored-By: Claude Fable 5 <noreply@anthropic.com>
Two additions, both observability only — no generation, routing, weight,
terrain or mesher behaviour changes.
1. Every progress print is now prefixed with elapsed time since generation
started, e.g. [+ 142.7s], including a line per pipeline stage and per county
road. The per-stage split (setup / continental loop / branch / county) can
now be read straight off the console. Two A* fix attempts have been reasoned
from structure rather than measurement; this makes the measurement free.
2. The end-of-run PNG capture was extracted into a reusable stage capture that
can be called at any pipeline boundary. Snapshots are now taken after
biomes, after towns, and after roads. The draw proxy renders whatever exists
at the time, so stages that have not run simply do not appear — and a future
water stage will show up automatically once it populates its data.
The existing capture path is reused unchanged: same offscreen SubViewport,
same draw proxy, same frame-yield plus double GPU wait. Those waits are
load-bearing, not superstition, and each staged capture honours them.
Snapshot filenames gain a stage suffix: Map_Seed_<seed>_1_biomes.png,
_2_towns.png, _3_roads.png. Nothing reads these but a human, verified.
Co-Authored-By: Claude Opus 5 (1M context) <noreply@anthropic.com>
A* was searching almost the whole island for every road. Godot's stock
estimate-to-goal is plain straight-line distance, which assumes every step
costs 1 — but a step through mountains costs up to 401 and a step near an
existing road cost 10,001. With the estimate that far below reality, A* cannot
rule anything out, so it degenerates toward Dijkstra.
Two changes, both aimed at that:
1. RoadPathGrid overrides the estimate to scale it by HEURISTIC_WEIGHT (3.0),
i.e. weighted A*. Paths may be up to 3x costlier than the theoretical best
in exchange for exploring far less. This does NOT push roads over mountains:
a ridge costs hundreds of times more than going around, which a 3x bias
nowhere near pays for.
2. ROAD_REPULSION_PENALTY replaces the hardcoded +10000 with 250. The old value
made ground near a road effectively infinite, and it compounded — each road
drawn made the next search slower. 250 still strongly discourages roads from
running alongside each other.
Terrain weights are untouched: the mountain curve (1 + elevation^3 * 400),
beach and wasteland costs are exactly as before, so mountains remain expensive
and roads still avoid them. Routing, tiers, smoothing and grid resolution are
also unchanged.
Co-Authored-By: Claude Opus 5 (1M context) <noreply@anthropic.com>
Every road path search — highway, branch, county — now goes through one
function instead of three direct GetPointPath calls. The function body is
exactly the call it replaced, so behaviour is unchanged.
This exists so the next commit's pathfinding change can be judged on its own:
if the generated map changes after this point, it was the heuristic, not a
refactor slip.
Routing is untouched: which towns connect, loop order, Prim's daisy-chain,
tier assignment and the abandon protocol all deal only in town positions and
never touch the grid.
Co-Authored-By: Claude Opus 5 (1M context) <noreply@anthropic.com>
