The bare TerrainGenConfig defaults did NOT reproduce the terrain the developer
locked, so "run the default generator" was not "the terrain in the gallery" —
the single most expensive fact in the codebase, and the reason a fresh chat
would spend an afternoon chasing differences that were CONFIGURATION, not
regression. This is the deliberate task that ends that, before any river work.
A1 — the defaults ARE the locked shape now. Five fields actually move:
SpeckRevert false->true, MinLandComponentFrac 3e-5->2.5e-7 (120x smaller; the
config default would have eaten real islands, not specks), SouthStretch 0->2,
FragmentAmp 0->0.5, Erosion false->true. Seven more were already correct via
SouthernStretch.Default* / CoastalFragment.Default* and are now pinned as
literals, because TerrainShapeV1 used to do that pinning and this default set
inherits the job. CoastShelf stays OFF — the locked shape has no shelf, and
evaluating it (D-041) is its own later task once water renders. Offshore stays
Off permanently (D-063): islands are organic-only, made by the stretch +
fragmentation and identified by the region layer, never placed.
A2 — the preserve mechanism. The curve knots are percentiles of the FAMILY-OFF
land distribution; flipping the defaults would have moved the pool, the knots,
and with them the render field of every batch including terrain-shape-v1
itself. So the pool is pinned family-off (TerrainGenConfig.WithFamilyOff /
CalibrationPool) rather than the knots being baked: calibration stays live, its
INPUT distribution is held still. The pin was a no-op by construction — it sets
the values the defaults carried the instant before the flip — and re-measuring
after confirms it: pool, all six knots, per-seed spread, shaped max,
monotonicity spikeMax and all seven band shares identical.
Applied wider than "in CalibrateCurve": OffshoreIslandsTool,
RegionLabelingTool and SouthernStretchTool generate their own family-off
field for the Phase-1 anchor, so the pool pin alone would NOT have covered
them and their a1 would have failed for a configuration reason. TerrainGenTool
too — it AUTHORED 02_pass1_port and must stay able to regenerate its own
anchor.
Recorded as a judged-and-parked property: knots measured family-off, applied
family-on. Deliberate, not an oversight. Same disposition as the mid-slope
feather.
A4 — no oracle may pass against a superseded baseline. Six anchors retired
(01/03/04/06/08/09) with their checks and ISLA_T0x_SOURCE defaults; three kept
(chat1/02_pass1_port as the family-off pass-1 guard, chat2/10 and chat2/11 as
the shape and erosion acceptance anchors). Two invariants were RE-POINTED
rather than lost — the southern stretch's north-lock and the coastal-fragment
interior-lock now compare against SAME-RUN fields, which is scale-free and
cannot be invalidated by a moved dump. The retired dumps are kept, not deleted,
and marked superseded in their INDEX.md.
A missing anchor is now LOUD. The old pattern skipped silently, so a moved
anchor did not make its oracle fail — it made it not RUN, and a batch with a
skipped check prints an all-PASS table that reads like a clean one. That is
the INVERSE of the hazard the re-baseline guards against, and the migration
below is exactly the event that would have triggered it, on nine anchors at
once. ShapingOracle.LoadAnchor now separates the two cases: absent -> throw;
present at another size -> loud INCONCLUSIVE, which is a fail, never a pass.
TerrainShapeV1 inverted from PRESET to GUARD and moved to its own file.
Apply() is gone — stamping the values on top of the defaults would MASK a
drift instead of catching it. Its constants are now the assertion target, and
Assert() refuses a run whose defaults have drifted off the locked shape.
B/C — batches are namespaced by chat: batches/<chat>/NN_slug/. Task numbers
restart at 00 per chat, so a flat root collided the moment a second chat
existed — four colliding prefixes across 25 batches, separable only by slug.
ToolingPaths.ChatSlug is REQUIRED (throws if unset) and defaults per tool to
its authoring chat, so re-running reproduces a batch in place while ISLA_CHAT
redirects — which is also what stops an acceptance run from overwriting the
very anchor it checks against. Writes go through BatchRoot; historical READS
compose against BatchesRoot and so carry the prefix in their own source string
("chat1/02_pass1_port"). The 25 existing batches were migrated moves-only.
ACCEPTANCE — 16 of 16 byte-identical, 0 failed. All 8 gallery seeds at 8192
from the bare defaults are byte-identical to chat2/10_frag4_seed_gallery
(= terrain-shape-v1, a59e52f); all 8 erosion fields byte-identical to
chat2/11_erosion (= ea291ea). Every gallery table row and every erosion
statistic reproduces its recorded value exactly. DrainageTool's a11 passes
bit-identical over 67,108,864 cells, and its analysis reproduces batch 12
exactly — so the whole chain rivers depends on (shape -> erosion -> drainage)
is unchanged. All 12 edited tools re-run clean; both new guards negative-tested.
The baseline moved in DEFAULTS, not in TERRAIN.
-> XX_Human/output/rivers/01_rebaseline_and_batch_namespace.report.md
Co-Authored-By: Claude Opus 5 (1M context) <noreply@anthropic.com>
Claude-Session: https://claude.ai/code/session_01WhkXBQh2tDmcWKpXYcj8vj
Presentation only. No generation file is touched — Topography, TerrainNoise,
IslandFalloff, Pass1Result, TerrainGenConfig and GenerationScale are all unchanged.
Batch naming, fixed in code. The prefix is the AUTHORING TASK number, not a running
counter: 04_review means "the batch task 04 authored", not "the fifth batch". It had
already drifted — tasks 02 and 03 produced 00_smoke through 05_trophy_10240 across
two tasks, so no folder name said which task made what. Now the task number is an
explicit argument to ToolingPaths.BatchRoot(taskNumber, descriptor), which composes
the prefix itself and REFUSES a descriptor that carries its own. All three tools
take it as ISLA_TASK. Verified: ISLA_BATCH=05_foo is refused with a stated reason
and exit 2, and creates no folder.
Also fixed: an exception out of _Ready does not stop Godot — it logs and the process
sits there with no main loop, so a misconfigured run HUNG rather than failing. A
hang looks like slow work, which is worse than a crash. The batch tools now catch,
print what was refused, and exit non-zero.
Grayscale mode: normalize a field to its own [min,max]. This is the one place
per-image normalization is correct — everywhere else anchors are fixed so images
compare, but here the point is to see one field at full contrast. The range is
printed and indexed so a shade reads back to a height. You cannot judge noise
through a palette: a ramp bends the distribution, a hillshade adds shape the data
does not have.
The wide Costa-Rica palette, and the reframing the developer asked for: the pretty
map is the WIDE GRADIENT RENDERED FLAT, and relief is no longer the hero. On raw
pass-1 noise a hillshade has nothing coherent to shade, so it renders fine fractal
bumpiness as fuzz that actively hides the elevation the colour is showing. Strong
hillshade is retained as diagnostic_relief and labelled a dev view — its bumpiness
is exaggerated slope, not extra terrain. Subtle relief is kept for comparison, with
the honest note that it still fuzzes until Phase 2 carves coherent landforms.
Legend: a colour bar with ticks drawn from the palette's own ramp, so it cannot
drift from the map beside it. Ticks are RELATIVE height and the image says NOT
METRES — the conversion is Phase 2's, and labelling it "m" would invent a fact in
the artefact a reader most trusts. Text comes from a 5x7 bitmap font written for
this, specifically so a legend does not drag in the SubViewport capture path.
Presentation only. Nothing here touches Topography, the noise, or any generation
constant; the renderer is handed a height field LOADED from a .f32 dump and has no
way to produce one, so a look change provably cannot move the terrain.
Hillshade: Horn 3x3, cell size 1, edges clamped (never wrapped — the Trench border
is a wall, not a seam). ZExaggeration is required rather than optional: measured
median land slope is 0.22 degrees unexaggerated, so the island shades as a flat
plane. Chosen from a measured slope table — zex 75 gives 16/28/37 deg at land
median/p90/p99, which reads as natural relief. It is a look dial; raw units are not
metres and no code may read it as if they were.
Palette: stops placed on the MEASURED height distribution, not spread linearly.
Land is bottom-heavy (median 0.456, p99 1.113, max 1.415 over 8.6M land columns
across four seeds), so a linear ramp would spend 99% of its range on 1% of the land
and the map would read as green with a few white dots. Bathymetry is compressed by
d/(d+0.35) so the shallow shelf gets the range and the featureless abyss flattens.
Anchors are absolute and fixed across the batch — a map coloured on its own min/max
cannot be compared with its neighbour, and comparison is the point of a batch.
Blend: the naive tint x hillshade darkens everything by 29% before any slope is
involved, because flat ground shades to sin(altitude). So shade is normalized by
its flat-ground value first — flat terrain keeps its true tint and only SLOPE moves
the colour — then shadows multiply while highlights screen toward white. That
asymmetry is the difference between a colour ramp and a map you would frame.
Relief fades to zero with depth below sea. Not only taste: the deep floor is the
Trench, a synthetic wall whose gradient is ~1.5x the p99 land gradient, so shading
it faithfully draws a bright rim around the map and lights the abyss with noise
mottle. The fade puts relief on the near-shore shelf where the bathymetry is real.
Three named looks (atlas / relief / dusk), gated like any other change and kept
deliberately few — iteration fatigue on a subjective gate is a real failure mode.
Each pair isolates one question.
HeightMapRenderer.cs is retired: its raw I/O moved to HeightField.cs and its ramp
to ReliefPalette.cs, so there is one palette everywhere and the generator's own
quick-look is coloured identically to a beauty render.
No biome words, no classification, no water. The 0.15 line is a colour boundary.
Ports MapGenerator.GenerateTopography's pass-1 loop (reference ~:553-619 at tag
pre-rewrite-reference / ab78883) into Tools/. Working code and its tuned constants
carried over verbatim, read from source rather than re-derived from a design
summary (D-050). Six elements, in the reference's execution order — the order is
load-bearing: the sinker lands before the Pow (superlinear), the Trench after it
(a raw additive wall), preTrenchFalloff captured between them.
The fractal config is now PINNED. The reference set only NoiseType/Seed/Frequency,
so the island's entire fractal character was Godot 4.7.1 constructor defaults that
nothing recorded. Measured on 4.7.2 (NoiseDefaultsProbe): Fbm / 5 / 0.5 / 2.0 / 0.0
— identical to the 4.7.1 values, so pinning reproduces the look with no delta. The
terrain no longer depends on an engine default, and the probe makes a future drift
visible instead of silent.
Two deliberate departures from the reference's literals, both flagged in-code:
- the latitude noise offset is expressed in map widths, not the reference's raw
+1000 px, so a resize no longer samples a different slice of the noise field
(chat1/00 §4.2). Pinned to 1000/8192 so the 8K realization is unchanged.
- the `if (temperature < 0.65f)` spine gate is dropped as the provable no-op it
is — southernFade already reaches exactly 0 at 0.65. Bit-identical.
The reference's "temperature" is ported as a latitude field and deliberately NOT
named temperature: it is stage-1-local input to terrain geometry, and climate is
stage 3 (D-049 §2, D-056). The ±0.1 wobble is kept — it is what stops the spine's
southern terminus being a ruler-straight line.
Deferred to Phase 2 with the seam open: coast shelf and offshore islets (below-sea,
judged once water renders). Pass1Result exposes PreTrenchFalloff at their exact
consumption point, plus HMaxSeed for the seed-dependent curve.
Render is a direct Godot.Image, not the SubViewport capture path — that machinery
exists to composite vector overlays and is why --headless hangs; Phase 1 has none.
Hypsometric above 0.15, bathymetric below, fixed ramp anchors so seeds and ablation
rungs are comparable. No biome words anywhere.
Verified: land fraction 51.5% identical at 1024, 2048 and 10240 — the scaling
discipline holds across a 10x resize. Full-size 10240 pass: 36.3 s.
No curve, erosion, rivers, water, crater, biomes, roads, or mesher.
