chat2/02 dissolved the terraces and lost two thirds of the mountain with them, then
concluded the loss was structural and needed a Phase-1 noise change. That conclusion
was wrong, and this commit is the refutation.
A monotone curve is a free reparametrization: it may be gentle in one place and steep
in another, and can lift bottom-heavy input into a substantial massif without ever
going flat. The area above a height is set by where the percentile->height mapping
crosses it, and that mapping is entirely ours to choose. The 02 sweep that "proved"
the loss structural varied climbFeather, which shapes the JOIN, not the mass
distribution — the wrong knob, and too strong a conclusion drawn from it.
Core/ClimbCalibration — the climb's control points are now MEASURED off the staircase
instead of invented from shape knobs. For p in {10,30,50,70,85,95} of above-ceiling
land, take that percentile's raw height and its staircase output height; PCHIP through
the pairs. That reproduces the staircase's elevation envelope, so the mountain mass
returns, while MinNormalizedSecant floors every grade so the flat bench and plateau
interiors become slope. The floor bites on exactly one segment — the plateau — which
is precisely where the staircase was flat.
ContinuousCurve.BuildCalibrated joins it to the same pinned lowland handover, the same
C1 join and the same per-seed spikeMax. The 02 analytic path survives unchanged as the
"before" contrast, and deliberately keeps its strictly-increasing-secant rule: a
calibrated curve is WAVY by design, so convexity is the wrong invariant for it and the
secant floor is the right one.
peakSharpness replaces summitDrama and fixes its bad trade. Drama steepened the peak by
pulling the summit ONSET down, dragging the whole massif with it (p99 199 -> 121 m).
Sharpness reshapes only above the last measured percentile, leaving that height fixed,
so peak and massif are independent: raising it leaves p90, >100 m and >220 m untouched
and only moves land within the summit.
Measured, both seeds, 2048:
variant >100 m >220 m p90
staircase (target) 16.05% 4.53% 127.4 m
continuous_02default 4.80% 0.63% 58.4 m
continuous_restored 14.25% 3.45% 123.2 m
continuous_bigger 19.70% 5.80% 163.5 m
Oracle all hard checks pass, including (a2) staircase still bit-identical to task 01's
dump and (d) lowlands bit-identical across every calibrated variant. New (g) reports
land above 100/220 m per variant and is deliberately NOT gated — it is a taste target
the developer tunes, and gating it would make mountainLift unusable. What it must never
do is stay silent, which is how 02 lost the mountain unnoticed.
Co-Authored-By: Claude Opus 5 (1M context) <noreply@anthropic.com>
Claude-Session: https://claude.ai/code/session_01DCWNaDZPfTiAy3meGNGgqt
Ports the reference's v5 height curve and shelf-detail passes onto Phase 1's shape
and re-calibrates them against this repo's actual pass-1 distribution. This is the
BASELINE the reshape gets judged against, not the reshape.
Core (engine-free, D-060):
- WorldScale — THE vertical yardstick. One metres/raw number (251), replacing the
prototype's three duplicate M_PER_UNIT constants and ~20 bare literals. The
chunk-height coupling it had there is recorded as a DEFERRED vault decision, not
inherited. RawFromMetres divides, matching the reference bit-for-bit.
- HeightCurve — the 7 bands, the frozen corner-fix blends, the per-seed spike
normalization, the 24-corner monotonicity sweep that throws and refuses.
Identity at and below sea, which everything downstream rests on.
- CurveKnots / CurveAnchors — input knots (measured percentiles) and output anchors
(storm ladder) split apart and both made parameters, so the anchors are A/B-able
without editing source. The reference's shipped knots are kept beside the measured
ones as the fidelity yardstick.
- TerrainDetailPass — micro-relief skin plus the shelf-edge KNOT warp (which slides
K3/K4/K5, not height — that is what keeps monotonicity structural). The crater
exclusion is ported and inert until the carve lands.
Tools:
- Shaping — pass 2a, producing the two height fields. classify is bit-for-bit the
raw pass-1 field; render is curved and detailed. Aliased when the curve is off,
as the reference did. Pass1Result is left immutable so the oracle can compare.
- LandHistogram — the calibration engine AND the diagnostic. The reference shipped
six knot literals and threw the measuring instrument away; this rebuilds it.
- ShapingOracle + CurveBaselineTool — four automatic checks before anything is
looked at, and the batch that runs them.
Measured, not assumed:
- Knots re-measured over a 6-seed / 12.8M-sample pool. They differ from the
reference's by at most 5.6 m of world height, against a 44.7 m per-seed spread —
the pass-1 port is faithful.
- Oracle all pass, including pass 1 bit-identical to Phase 1's own .f32 dump.
- Band shares land on 60/13/10/5/8/3/1 to 0.00 pp.
- Knots hold across map size: the 8K delta (5.8 m) sits inside seed noise.
The finding the histograms deliver: 83% of land ends below 100 m and 96% below
220 m, with the median column at 13 m. That is the share targets doing exactly what
they say, not a bug — and it is the developer's call, which is why nothing here
reshapes it and the palette was deliberately left mis-fitted rather than recalibrated
to disguise it.
Co-Authored-By: Claude Opus 5 (1M context) <noreply@anthropic.com>
Claude-Session: https://claude.ai/code/session_01DCWNaDZPfTiAy3meGNGgqt
