The task-10 draft's PASS B shipped and produced the canonical grid
artifact: thousands of straight, disconnected, pooling scratches. Per-
cell steepest descent on a regular grid can only route along its eight
neighbour headings, so at map scale the "channels" read as hatching,
not drainage. Reverted entirely rather than tuned -- no K, p or mask
setting fixes a directional basis. Rivers and erosion move to Phase C
as a hydraulic-erosion pass over FINAL terrain.
Removed: FlowAccumulation / IncisionWeight / EdgeBlend and the INC_*,
SEA_CLAMP, SHELF_INC_WEIGHT and CRATER_* constants; RunIncisionPass and
the pass-2b call; the six incision fields from TDTL (writer, parser,
harness). KEPT, untouched and developer-approved: pass A, the shelf
micro-relief skin, and its ShelfReliefAmp dial.
The crater carve folds back into the single pass-2 loop it came from,
carving two LOCALS written once each. That is what the code did before
the draft split it out, and it makes the aliased double-carve that the
split introduced (fix 1b98fb5) structurally impossible rather than
merely fixed -- there is no longer a read-modify-write to get wrong.
TDTL bodies are now versioned (BlueprintFormat.TDTL_VERSION = 2) and the
parser skips a body version it does not know instead of misreading the
longer v1 layout into plausible nonsense. The only v1 payloads that
exist are in the reverted batch's own tree.
Co-Authored-By: Claude Opus 5 (1M context) <noreply@anthropic.com>
Two paired detail passes on the locked v5 skeleton, output-heights
only (classify path untouched):
PASS A — shelf micro-relief: +-ShelfReliefAmp (default 3 m) Simplex
skin (seed resolved+7409, ~40 undulations/island ~ 200 m features),
weighted by shelf-ness (full mid-shelf, feathered to zero 30% of a
band half-width into the risers) — both shelves get their rolling
texture back; risers and peaks untouched.
PASS B — drainage incision: D8 steepest-descent routing + height-
ordered flow accumulation over the curved+relieved land
(TerrainDetailPass — pure array machinery, named C++ candidate per
D-035); depth = K*accum^p*slope (K=0.78, p=0.45 concave, cap 30 m),
masked full on risers / 30% on shelves / zero on the toe, above the
plateau top, and within 1.2x CraterRadius (feathered to 1.4x); hard
clamp: carved height >= sea + 1 m. Ordering: curve -> relief ->
incision -> crater carve (the carve stays the final authority; carve
moved to its own pass 2c, bit-identical expression on both maps).
The pass prints its own MEASURED depth distribution.
Gate TerrainDetail "off"|"v1" (default v1; both passes one judged
unit; no-op without the curve) + ShelfReliefAmp dial. New TDTL section
(38 B: version + relief/incision params + seed offset) across
writer/parser/harness — blueprints stay self-describing.
Co-Authored-By: Claude Fable 5 <noreply@anthropic.com>
The documented one-liner the task-09 gate triggers: TerrainCurve gate
is now "off"|"v5" (default v5 = the BALANCED preset, id 2);
"v5-compact" retired with a verdict-specific error, "v5-balanced"
redirects to plain "v5". Knots/TCRV encoding unchanged.
Co-Authored-By: Claude Fable 5 <noreply@anthropic.com>
The three corner fixes (both presets): riser endpoint slope floors
0.2 -> 0.1 (0.1u + 0.9*smoothstep — climbs decelerate into shelves and
accelerate out); summit-spike base floor 0.1 -> 0.05
(0.05u + 0.95*u^4 — no hard skirt under the peaks); SHELF_SPAN_MIN
2 m -> 6 m (pronounced shelves keep a gentle tilt).
Knots are preset-parameterized (CurveKnots, explicit parameter — pure,
D-035), calibrated from the same pooled batch-04 CDF:
COMPACT P65/77/84/88/94/97 -> 65/12/7/4/6/3/3 land split
BALANCED P60/73/83/88/96/99 -> 60/13/10/5/8/3/1
Gate: "off"|"v5-compact"|"v5-balanced" (batch-only tri-state;
interim default v5-balanced pending the developer's verdict — the
winner becomes plain "v5" in a follow-up commit); v1-v4 retired
loudly. Assertion runs per preset (8 corners x per-seed spikeMax; the
lowered floors stay strictly positive). TCRV v5 extension (+9 B):
preset id + K5/K6 — the effective curve is unambiguous from the
record; old records parse (version-dispatched); harness compares.
Co-Authored-By: Claude Fable 5 <noreply@anthropic.com>
Per the task-07 gate: the terraces work but uniform anchors put a flat
ring at exactly 100 m and 220 m on every mountain. v4 keeps v3's
structure (frozen toe/rise, three risers, per-seed u4 spike to 420 m)
and turns the shelf anchors into smooth spatial fields: bench
100+-12 m and plateau 220+-20 m via two decorrelated very-low-freq
Simplex fields (~3 undulations per island width), plus a strength
field (~5/island) blending each shelf's output span between ~2 m
(pronounced flat) and ~25 m (barely a hint) — the optional strength
modulation shipped, ordering-safe by construction (worst-case bench
top 0.6962 < plateau min 0.9468). Field seeds derive from the RESOLVED
noise seed + fixed offsets (7101/7207/7303) — no config knob. Apply is
per-column with all modulated values as pure parameters (D-035); the
classify path never sees them.
Monotonicity assertion now sweeps all 8 modulation-extreme corners x
per-seed spikeMax. TerrainCurve gate "off"|"v4" (default v4);
v1-v3 retired loudly. TCRV extended (+36 B when version>=4:
amplitudes, span range, frequencies, seed offsets — length-framed
section makes the layout change safe; parser dispatches on the curve
version byte; harness compares the extension).
Note: MapGenerator.cs also carries the developer's editor whitespace
normalization (spaces->tabs, git diff -w empty before this change).
Co-Authored-By: Claude Fable 5 <noreply@anthropic.com>
Per the task-06 ground-test verdict (floor and 420 m ceiling frozen;
v2's ascent read flat-then-wall — 87% of the vertical budget in the
last 4% of input): the ascent is rebuilt as a terraced climb. Knots
recalibrated from the same pooled batch-04 land CDF at
P59/72/82/87/95/98 (K=0.509179/0.604081/0.698485/0.767213/0.930304/
1.050720), pooled land fractions exactly 59/13/10/5/8/3/2 (orange/red/
foothill-riser/bench/mid-riser/plateau/spike). Segments: frozen toe
and rise (storm anchors), smoothstep foothill riser to a near-flat
100 m bench, smoothstep mid riser to the near-flat white plateau at
220 m (relocated from 50 m — mountain towns/snow belong there),
per-seed-normalized u4 summit spike to 420 m (both retained from v2),
linear tail. Per-seed effective-curve monotonicity assertion retained.
TerrainCurve gate: "off"|"v3" (default v3); v1/v2 retired with a
loud config error (old blueprints regenerable). TCRV: knot slots carry
K1..K4 (K5/K6 are version constants), PlateauLo/Hi carry the two bench
anchors; version byte selects the semantics.
Co-Authored-By: Claude Fable 5 <noreply@anthropic.com>
Per the task-05 hillshade-gate verdict: lowlands frozen (identity/toe/
rise/shoulder/plateau byte-unchanged); the spike now maps [t4,
hMaxSeed] — each seed's own raw pre-curve maximum, computed in a new
pass-1 over GenerateTopography — onto the peak band, so every island
reaches the ceiling (v1's pooled-max domain left mid-range seeds at
110–175 m). Spike stiffened to 0.1u + 0.9u^4; peak cap raised to
420 m above sea (1.82869). Degenerate near-flat guard: spike domain
floored at t4 + 0.01. The curve is now SEED-DEPENDENT: hMaxSeed is a
pure parameter (D-035), recorded in TCRV (field renamed
HMaxCal -> SpikeMax, same byte layout; v1 semantics = pooled max, v2 =
per-seed), and the monotonicity assertion runs per generation against
the effective curve. TerrainCurve gate: "off"|"v2" (default v2);
"v1" retired with a loud config error (task-05 blueprints are
regenerable). Classify path untouched — the biome/water oracle must
hold unchanged.
Co-Authored-By: Claude Fable 5 <noreply@anthropic.com>
HeightCurve (pure static, D-035): calibrated monotonic piecewise map —
identity at/below sea 0.15; ease-out toe to the orange ceiling 0.206
(75% coverage, knot t1=P75=0.628736 from batch-04's pooled flat-sea
land CDF, 340.6M samples); linear rise to red 0.27 (t2=P90); smooth
shoulder to the 50m plateau shelf 0.3492 (t3=P93); near-flat plateau
step (t4=P96); accelerating spike to the 220m peak cap 1.0265; linear
tail past the calibrated max. Strict monotonicity asserted numerically
at startup, loud throw on violation.
Applied in GenerateTopography AFTER noise+falloff+Trench, BEFORE the
crater carve (carve cuts curved terrain; rim/bowl untouched by the
curve). Biome oracle mechanism: a retained uncurved classify heightmap
(alias of _heightMap when off, zero cost) feeds biome rules, both
flood fills, and the shared water predicates — classification is
curve-invariant by construction. Towns/roads/diagnostics/exported
heights use curved terrain; town positions may legitimately move.
Config gate TerrainCurve: "off"|"v1" (default v1), unknown values
rejected loudly.
Co-Authored-By: Claude Fable 5 <noreply@anthropic.com>
SeaLevelModel: "flat" (one scalar, SeaLevelValue) or "field" (the
legacy latitude Lerp 0.26..0.15). Only GetSeaLevel's body changes —
all nine call sites (crater carve target, both flood fills, biome
split, beach band, Capitol window, town filters, A* zero-point)
inherit the model automatically; no consumer re-tuning. Default:
flat 0.15, pinned in ServerConfig.json.
Co-Authored-By: Claude Fable 5 <noreply@anthropic.com>
Config flag SkipRoads (default false): when on, GenerateRoadsAsync and
the 3_roads snapshot are skipped entirely; export proceeds with all
four road sections present but empty (both v2 and legacy v1 permit
zero counts); the console states loudly that the blueprint is a
road-less iteration artifact.
Co-Authored-By: Claude Fable 5 <noreply@anthropic.com>
Uncommenting the random-seed line left its trailing prose 'if 0 also
randomizes' as code, which stopped the whole project compiling. Only the
comment marker is restored — the choice of random-vs-fixed seed is left as set.
Co-Authored-By: Claude Opus 5 (1M context) <noreply@anthropic.com>
